Amplifiers/PreAmplifiers > Art Audio | Audiomat | Blacknote | Clayton Audio | Consonance | Dynaco / Dynakit | Goldenote (formerly Bluenote) | Herron | Jolida | Lector-Audio | Lehmann | VAC
Blacknote
DSA150 Special. The DSA150 SPECIAL is a true 150watt New Modulated stereo integrated amplifier designed to satisfy the most discriminating audio enthusiasts. The DSA150 SPECIAL is able to deliver uncompromised sound quality with the typical great power and versatility of such innovative technology.
The DSA150 SPECIAL has a traditional massive Dual-Mono I.E. handcrafted transformer power supply.
The unit features separates preamplifier power amplifier stages. The preamplifier stage is controlled by a Blacknote proprietary design boasts fine resistors stepping Active Volume Control system enabling high resolution, low distortion and perfect channel balance.
The Blacknote "Flat Load Independent-Frequency Response" allows perfect matching with any high-end audio speaker. The FLI-FR system keeps the frequency response stable independently of the speaker load enable a perfect linear response though maintaining the remarkable Class D handling 1ohm matching.
Real 150 watt per channel are able to effectively drive almost all the hi-fi speakers of the market, besides the very low output noise & impedance of the Blacknote DSA150 SPECIAL amplifier joined with super wide bandwidth insure top class performance with level of accuracy very hard to reach with traditional amplifiers.
The DSA150 SPECIAL is fully remoted to deeply control the unique features of one of the most innovative amplifier available today.
MAIN DETAILS |
|
POWER OUTPUT |
2 X 150W Continuous Power at 8, 4 & 2O |
FREQUENCY RESPONSE |
10Hz - 50KHz @ +/- 3dB |
THD (Total Harmonic Distortion) |
|
RATIO SIGNAL TO NOISE |
>95dB |
MAX OOUTPUT NOISE |
80µV |
DYNAMIC RANGE |
>120dB |
DAMPING FACTOR |
>400 |
SLEW RATE |
15Volt/µs |
VOLUME CONTROL |
Double Mono Active Volume Control |
|
|
AUDIO INPUTS |
|
ANALOGUE INPUTS |
3 per RCA & 3 per XLR stereo |
INPUT SENSITIVITY |
450mV |
INPUT IMPEDANCE |
47kO |
POWER AMPLIFIER INPUT |
Stereo RCA |
|
|
AUDIO OUTPUTS |
|
PRE OUT |
One stereo RCA |
SPEAKER |
Gold Plated Binding Posts |
OUTPUT IMPEDANCE |
0.02O @ 1KHz |
|
|
CONNECTIVITY |
|
REMOTE INFRA-RED |
RC5 proprietary code variable |
|
|
POWER |
|
MAINS SUPPLY |
100V ? 115V ? 230V ? 50 or 60Hz (depending on market destination not convertible) |
POWER ABSORBATION |
Min. |
DYNAMIC POWER |
>350W IHF |
|
|
UPGRADES |
|
SPECIAL |
Goldenote Lucca Power Chord |
|
|
PHYSICAL |
|
DIMENSIONS |
430mm L x 145mm H x 390mm D |
WEIGHT |
23Kilos (51Lbs.) |
|
|
FINISHES |
|
FRONT PANEL |
Brushed Black & Silver anodised aluminium |
CASE |
Black powder coated |
DSA100 Special. The DSA100 SPECIAL is a fully remoted 100watt New Modulated stereo amplifier designed to achieve audiophile performance with the typical great power and versatility of such innovative technology.
The DSA100 SPECIAL has the internal preamplifier and power amplifier stages separated. The preamplifier stage is controlled by a Blacknote proprietary design boasts fine resistors stepping Active Volume Control system enabling high resolution, low distortion and perfect channel balance.
The DSA100 SPECIAL has a traditional massive I.E. handcrafted transformer power supply.
A proprietary Blacknote design "Flat Load Independent-Frequency Response" allows perfect matching with any high-end audio speaker. The FLI-FR system keeps the frequency response stable independently of the speaker load enable a perfect linear response though maintaining the remarkable Class D handling 1ohm matching.
Real 100 watt per channel are able to effectively drive almost all the home speakers of the market, besides the very low output noise & impedance of the Blacknote DSA100 SPECIAL amplifier joined with super wide bandwidth insure top class performance with level of accuracy very hard to reach with traditional amplifiers.
MAIN DETAILS |
|
POWER OUTPUT |
2 X 100W Continuous Power at 8, 4 & 2O |
FREQUENCY RESPONSE |
10Hz - 50KHz @ +/- 3dB |
THD (Total Harmonic Distortion) |
|
RATIO SIGNAL TO NOISE |
>95dB |
MAX OOUTPUT NOISE |
80µV |
DYNAMIC RANGE |
>120dB |
DAMPING FACTOR |
>400 |
SLEW RATE |
15Volt/µs |
VOLUME CONTROL |
Double Mono Active Volume Control |
|
|
AUDIO INPUTS |
|
ANALOGUE INPUTS |
3 per RCA & 1 per XLR stereo |
INPUT SENSITIVITY |
450mV |
INPUT IMPEDANCE |
47kO |
POWER AMPLIFIER INPUT |
Stereo RCA |
|
|
AUDIO OUTPUTS |
|
PRE OUT |
One stereo RCA |
SPEAKER |
Gold Plated Binding Posts |
OUTPUT IMPEDANCE |
0.02O @ 1KHz |
|
|
CONNECTIVITY |
|
REMOTE INFRA-RED |
RC5 proprietary code variable |
|
|
POWER |
|
MAINS SUPPLY |
100V ? 115V ? 230V ? 50 or 60Hz (depending on market destination not convertible) |
POWER ABSORBATION |
Min. |
DYNAMIC POWER |
>350W IHF |
|
|
UPGRADES |
|
SPECIAL |
Goldenote Lucca Power Chord |
|
|
PHYSICAL |
|
DIMENSIONS |
240mm L x 120mm H x 400mm D |
WEIGHT |
12Kilos (26Lbs.) |
|
|
FINISHES |
|
FRONT PANEL |
Brushed Black anodised aluminium |
CASE |
Black powder coated |
DSA100 Mono. The DSA100 Mono is a 100watt New Modulated mono amplifier designed for custom installation and to transform passive loudspeakers in active ones conveniently.
The DSA100 Mono has a full digital Class D output stage powered by a traditional massive I.E. handcrafted transformer.
The unit features an automatic audio signal switching On/Off for convenient installations, together with a -4dB/+10dB set up fro pro application.
A proprietary Blacknote design "Flat Load Independent-Frequency Response" allows perfect matching with any high-end audio speaker. The FLI-FR system keeps the frequency response stable independently of the speaker load enable a perfect linear response though maintaining the remarkable Class D handling 1ohm matching.
Real 100 watt per channel are able to effectively drive almost all home speakers of the market, besides the very low output noise & impedance of the DSA100 Mono amplifier joined with super wide bandwidth insure top class performance with high level of accuracy.
MAIN DETAILS |
|
POWER OUTPUT |
100W Continuous Power at 8, 4 & 2O |
FREQUENCY RESPONSE |
10Hz - 50KHz @ +/- 3dB |
THD (Total Harmonic Distortion) |
|
RATIO SIGNAL TO NOISE |
>95dB |
MAX OOUTPUT NOISE |
80µV |
DYNAMIC RANGE |
>120dB |
DAMPING FACTOR |
>400 |
SLEW RATE |
15Volt/µs |
|
|
AUDIO INPUTS |
|
ANALOGUE INPUTS |
1 per RCA & 1 per XLR |
INPUT SENSITIVITY |
450mV |
INPUT IMPEDANCE |
47kO |
|
|
AUDIO OUTPUTS |
|
SPEAKER |
Gold Plated Binding Posts |
OUTPUT IMPEDANCE |
0.02O @ 1KHz |
|
|
POWER |
|
MAINS SUPPLY |
100V ? 115V ? 230V ? 50 or 60Hz (depending on market destination not convertible) |
POWER ABSORBATION |
Min. |
DYNAMIC POWER |
>350W IHF |
|
|
UPGRADES |
|
SPECIAL |
Goldenote Lucca Power Chord |
|
|
PHYSICAL |
|
DIMENSIONS |
240mm L x 120mm H x 400mm D |
WEIGHT |
12Kilos (26Lbs.) |
|
|
FINISHES |
|
FRONT PANEL |
Brushed Black anodised aluminium |
CASE |
Black powder coated |
