Amplifiers/PreAmplifiers > Art Audio | Audiomat | Aural Audio | Bluenote | Consonance | Dynaco / Dynakit | Jolida | Lehmann | VAC
Dynaco/Dynakit
Dynaco / Dynakit Mark III
Full kit package, less tubes and top vented cover.
Kit requires user assembly of PC board.
Choose either type: (A) carbon composition resistors or type: (B) metal film resistors.
| CIRCUIT TYPE: |
PUSH-PULL DESIGN (MONO AMP) |
| POWER OUTPUT: |
55 WATTS RMS |
| TUBE TYPES: |
(2) 6550 OR KT88 OUTPUT TUBES "MATCHED PAIR"
(1) 6AN8 (6AN8A) INPUT TUBES
(1) GZ34/5AR4 RECTIFIER TUBE |
| INPUT SENSITIVITY: |
1.5V FOR 55 WATTS OUTPUT |
| INPUT IMPEDANCE: |
470K OHMS |
| OUTPUT IMPEDANCES: |
4, 8 & 16 OHMS |
| NOISE & HUM: |
MORE THAN 90 DB BELOW FULL RATED POWER |
| THD: |
LESS THAN 1% AT FULL POWER |
| FREQ. RESPONSE: |
20 HZ TO 20K HZ AT FULL POWER + / - 1 DB |
| POWER SOURCE: |
120 VAC 60 HZ @ 180 WATTS (MAX) |
| SIZE: |
6 ¾" H X 9" W X 9" D |
| WEIGHT: |
28 Lbs. |
Dynaco / Dynakit Mark IV
Full kit package less tubes and top vented cover.
Kit requires user assembly of PC board. Choose either type: (A) carbon composition resistors or (B) metal film resistors. INCLUDES (1) SA-6GH8A 9 Pin Socket Adapters.
| CIRCUIT TYPE: |
PUSH-PULL DESIGN (MONO AMP) |
| POWER OUTPUT: |
40 WATTS PER CHANNEL |
| TUBE TYPES: |
(2) EL34 (6CA7) OUTPUT TUBES "MATCHED PAIR"
(1) 7199 PENTODE TUBE
(1) GZ34/5AR4 RECTIFIER TUBE |
| INPUT SENSITIVITY: |
1.3V FOR 40 WATTS OUTPUT |
| INPUT IMPEDANCE: |
470K OHMS |
| OUTPUT IMPEDANCES: |
4, 8 & 16 OHMS |
| NOISE & HUM: |
MORE THAN 90 DB BELOW RATED POWER |
| THD: |
LESS THAN 1% AT FULL POWER |
| FREQ. RESPONSE: |
20 HZ TO 20K HZ AT FULL POWER + / - 1 DB |
| SIZE: |
6 ½" H X 14" W X 5" D |
| WEIGHT: |
21 Lbs. |
Dynaco / Dynakit ST 35
Full kit package, less tubes and top vented cover.
Kit requires user assembly of PC boards. Choose either type: (A) carbon composition resistors or (B) metal film resistors.
| CIRCUIT TYPE: |
PUSH-PULL DESIGN (STEREO AMP) |
| POWER OUTPUT: |
17.5 WATTS PER CHANNEL |
| TUBE TYPES: |
(4) EL84 (6BQ5) OUTPUT Tubes "MATCHED QUAD"
(2) 7247 (12DW7) INPUT TUBES |
| INPUT SENSITIVITY: |
1 VOLT FOR 17.5 WATT OUTPUT (PER CHANNEL) |
| INPUT IMPEDANCE: |
500K OHMS |
| OUTPUT IMPEDANCES: |
4 & 8 OHMS |
| NOISE & HUM: |
80 DB BELOW RATED POWER |
| THD: |
LESS THAN 1% AT FULL POWER |
| FREQ. RESPONSE: |
20 HZ TO 20K HZ AT FULL POWER + / - 1 DB |
| MIN CHANNEL SEP.: |
80 DB |
| SIZE: |
4" H X 13" W X 5 ½" D |
| WEIGHT: |
16 Lbs. |
Dynaco / Dynakit ST 70
Full kit package, less tubes and top vented cover.
Kit requires user assembly of PC board. Choose either type: (A) carbon composition resistors or (B) metal film resistors. INCLUDES (2) SA-6GH8A 9 Pin Socket Adapters.
| CIRCUIT TYPE: |
PUSH-PULL DESIGN (STEREO AMP) |
| POWER OUTPUT: |
35 WATTS PER CHANNEL |
| TUBE TYPES: |
(4) EL34 (6CA7) OUTPUT TUBES "MATCHED PAIRS"
(2) 7199 INPUT TUBES
(1) GZ34/5AR4 RECTIFIER TUBE |
| INPUT SENSITIVITY: |
1.3V FOR 35 WATTS OUTPUT |
| INPUT IMPEDANCE: |
470K OHMS |
| OUTPUT IMPEDANCES: |
4, 8 & 16 OHMS |
| NOISE & HUM: |
MORE THAN 90 DB BELOW RATED POWER |
| THD: |
LESS THAN 1% AT FULL POWER |
| FREQ. RESPONSE: |
20 HZ TO 20K HZ AT FULL POWER + / - 1 DB |
| MIN CHANNEL SEP.: |
55 DB |
| SIZE: |
6 ½" H X 13" W X 9 ½" D |
| WEIGHT: |
32 Lbs. |
